Pneumatic hardware tools

According to the basic working mode, pneumatic tools can be divided into rotary type (eccentric movable vane type) and reciprocating type (volumetric piston type). The general pneumatic tools are mainly composed of power output part, operation form conversion part, intake and exhaust part, and operation open. With the main part of the stop control part, the tool housing, etc., of course, the pneumatic tool must also have an energy supply part, an air filtration and air pressure adjustment part, and a tool attachment.

Tool attachment: The tool attachment here refers to the tool that is directly in contact with the workpiece on the body of the pneumatic tool. The pneumatic triple joint takes over the task.

The pneumatic triplex is mainly composed of a barometer, a filter, an oil mister, a pressure regulator, etc., wherein the filter has a built-in filter element, which is to be maintained and periodically replaced after being used for a period of time; such compressed air is not subjected to any treatment. Direct access to the air motor will result in a greatly shortened motor life, resulting in insufficient power output and instability of the entire tool, which may cause damage to the components such as the motor. For this purpose, the compressed air from the pipeline to the pneumatic tool Compressed air filtration and adjustment devices must be provided, including various types of pneumatic sleeves, posts, adapters, cutter heads, etc.

Power output part: It is one of the main components of pneumatic tools. It mainly consists of a pneumatic motor and a power output gear. It relies on high-pressure compressed air to blow the motor blades to rotate the motor rotor, and to output the rotary motion and drive through the gears. The entire form of work transforms part of the movement.

According to whether the stator and the rotor are concentric, the pneumatic horse air motor can be divided into a concentric motor and an eccentric motor. According to the number of intake holes, it can be divided into a single air inlet motor, a double air intake motor and a multi-inlet motor. No matter what kind of air motor, it relies on compressed air to blow the motor blades to drive the rotor to rotate. When the motor blades rotate at high speed, they always rub against the inner wall of the stator. It is the most common vulnerable part in the motor, so it The quality of the compressed air and the presence of lubricating oil molecules in the compressed air are very high.

The assignment form conversion section:

It mainly converts the rotary motion of the motor output accordingly. In the automobile manufacturing industry, since there are many ways of screwing, most of them are rotary motions, and of course there are linear reciprocating motions. For different types of pneumatic tools, the operating part conversion part is mainly divided into mechanical clutch and planetary gear set, friction plate clutch and planetary gear set, hydraulic cylinder, torsion bar and hammer block group.

The above components are all important components based on the rotary motion. It determines the important parameters of the torque, speed, and tightening accuracy of the pneumatic tightening tool. Due to its constant clutching, compression or torque conversion, its components are Vulnerable to damage.

Intake and exhaust section: Obviously, the intake and exhaust section is the relevant passage for compressed air in and out, and is an energy supply system that ensures normal movement of the motor.

The motion opening and stopping control part: the pneumatic switch generally described is susceptible to damage because it is in direct contact with the operator and external objects at the moment, and is multi-engineered plastic products.

Energy supply part: The compressed air is mainly formed by the air compressor compressing the atmosphere, and is sent to the relevant gas and electricity by the compressed air pipeline, and is pulsating.

Air filtration and air pressure adjustment section:

Since compressed air is usually transported through pipes made of seamless steel pipes, rust on the inner walls, moisture in compressed air, dust, etc., will continue to form during long-term use. If such compressed air does not undergo any treatment and directly enters the air motor, the life of the motor will be greatly shortened, resulting in insufficient power output of the whole tool and instability, which may cause damage to the connecting parts of the motor and the like. Compressed air filtration and adjustment devices must be provided between the compressed air delivered by the pipeline and the pneumatic tools. The pneumatic triple joints undertake this task. The pneumatic triplex is mainly composed of a barometer, a filter, an oil mister, a pressure regulator, etc., wherein the filter has a built-in filter element, and is subjected to maintenance cleaning and regular replacement after being used for a period of time.

Global hardware network

Concerned about surprises

Label: various functions of pneumatic hardware tools

Previous: Stainless steel selection skills Next: Protective mask maintenance method

The equipment reconstruction of Chemical Dosing System in Water Treatment Plant was performed in the case of non-stop production,and the new diaphragm dosing pump and control system were installed.After the reconstruction,the system has enough ability to deal with the extreme raw water quality and ensure the production safety during peak water supply period and flood period.The energy saving and consumption reduction effects are obvious.

Chemical Dosing System

Chemical Dosing System For Boiler, Oilfield Dosing Machine, Flocculant Dosing System, Chemical Dosing System

Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com